(323) 440-0395 Plan your project

Drywall and plaster · Southern California

Where finish meets perfection.

Family-owned drywall and plaster contractor for high-end custom homes and commercial projects in Orange, Los Angeles, Riverside and San Bernardino counties.

Plan your project (323) 440-0395
Run by the family Hector Flores, President About 20 years in drywall, learned at his father's side

How a perfect wall is made

Every finish starts at the studs.

From metal stud framing to the final skim coat, we take walls and ceilings from bare framing to ready for paint. Watch this one go back to its studs, then come together.

Levels of finish

From bare steel to Level 5.

The Gypsum Association grades drywall finish from Level 0 to Level 5 (GA-214). Level 5 is the top of the scale: the finish meant for gloss paint and hard, low light.

  1. Level— FrameSteel studs, square and plumbMetal stud framing sets every line the finish will follow, with a bent track for the arch.
  2. Level0 HangBoard hung, corners beadedSheets screwed off at the studs and corner bead set on the arch. Level 0: no taping yet.
  3. Level1–2 TapeTape bedded, first coat onPaper tape set in compound over every joint, wiped with a thin coat; screws and bead get their first.
  4. Level3–4 CoatCoats feathered and sandedSecond and third coats, each wider than the last, sanded smooth and free of tool marks.
  5. Level5 SkimA skim over the whole surfaceLevel 5: one thin coat across everything, so paint and low light find nothing to catch on.

Pick a finish

Drag the knife. See the finish.

Four finishes we lay by hand. Pick one, then pull the knife across the wall.

Finish
Illustration of a finished hall seen through a wide arch, with a curving stair in low afternoon light

Our work

Step through to the work we’ve done.

Next, real job photos taken on site: from a run of angled fins in Dana Point to a commercial space in Los Angeles.

See all our work
Tall wall with a run of angled drywall fins and recessed lights, coated and ready for paint Open-riser stair along a coated wall that rises two floors Two-storey hallway with a tall window; a finisher on a ladder works on the window return

Dana Point

Wall installation

A multi-storey home: long coated walls, a run of angled fins, an open stair and walls of glass.

See the project
Curved stair wall lit by a work light Open landing above a double-height room, walls finished Upstairs hall that looks down into the stairwell

Newport Beach

Texture finishing

Finished walls round a double-height stairwell and a curved stair wall.

See the project
Wide arched opening that looks through to the stair Room with a wide arched opening, a row of small windows and a stair rail Room with an arched niche beside an arched doorway

San Juan Capistrano

Arches and double-height rooms

Two homes: one built round wide arched openings and niches, one round double-height rooms and glass.

See the project
Entry with tall steel-framed windows and a stair, walls finished Open living area with a long soffit and recessed lights, coated Doorway under a vaulted ceiling, walls coated

Irvine

Drywall repair

Repair and refinishing through an entry, a vaulted hall and an open living area.

See the project
A finisher on a scissor lift coating a tall commercial wall Tall commercial wall with two arched windows and a scissor lift Tall commercial room under exposed beams, every joint and fastener spotted

Los Angeles

Acoustic removal, commercial

A tall commercial space: acoustic removal, with every joint and fastener spotted from the lift.

See the project
Every project, every photo Our work

What we do

Drywall and plaster, from framing to the final coat.

Board, finish, texture, plaster, custom details and repair, for custom homes and commercial work.

Upper landing with a long open rail and a sloped ceiling, walls coated Drywall installation Residential and commercial board work with clean alignment, durability and surfaces ready to finish. View service Curved stair wall lit by a work light Taping and Level 5 finishing Taping, mudding and finishing to the level your paint and your light call for, up to a Level 5 smooth finish. View service Open landing above a double-height room, walls finished Texture and texture matching New wall and ceiling textures applied evenly, and existing textures matched so a repair disappears. View service Room with an arched niche beside an arched doorway Venetian plaster and hand-trowel finishes Plaster finishes applied by hand, from Venetian plaster to hand-trowel textures, for walls with depth. View service Tall wall with a run of angled drywall fins and recessed lights, coated and ready for paint Custom details Shadow reveals, trimless door jambs, mud-in can lights, Fry reglet, arches and curves: the details of a custom home. View service Open living area with a long soffit and recessed lights, coated Repair and restoration Walls and ceilings damaged by water, leaks or moisture, patched or replaced and matched back to like-new. View service
Hector Flores and his father in Flores Quality Drywall caps and shirts

The family behind the finish

A trade learned side by side.

Hector Flores, President, learned drywall as a young man working alongside his father, who brings even more years of drywall and construction experience to the company. Family-owned since 2015, built on what was passed down long before.

2015
Licensed with the CSLB, #1000495, B – General Building
About 20 years
Hector's own hands-on experience in drywall
4 counties
Orange, Los Angeles, Riverside and San Bernardino
Read our story

Where we work

Across Southern California.

We work across Orange, Los Angeles, Riverside and San Bernardino counties. The pins are the cities of our recent projects; tap one to see it.

  • Orange County
  • Los Angeles County
  • Riverside County
  • San Bernardino County
Map of Orange, Los Angeles, Riverside and San Bernardino counties with our project cities: Dana Point, Newport Beach, San Juan Capistrano, Irvine, Los Angeles Los AngelesSan DiegoRiversideSan BernardinoVenturaOrangePacific OceanBuena Park Dana Point Newport Beach San Juan Capistrano Irvine Los Angeles
Boundaries: US Census Bureau

Questions

Before you book.

Plain answers, from the licence to the finish. For anything else, call (323) 440-0395.

Yes. Our California contractor's licence is CSLB #1000495 (B – General Building), first issued in 2015 and current, with a contractor's bond and workers' compensation insurance. You can look the number up on the CSLB website.

Across Orange, Los Angeles, Riverside and San Bernardino counties. Our recent projects are in Dana Point, Newport Beach, San Juan Capistrano, Irvine and Los Angeles.

It is the top grade on the Gypsum Association's scale of drywall finish (GA-214): a Level 4 finish with a thin skim coat over the whole surface. It is the finish meant for gloss and semi-gloss paint and for walls under hard, low light, like wall washers or a window close by.

Yes. Texturing and texture matching are part of our work, along with patching and restoring walls and ceilings damaged by water, leaks or moisture.

Yes. Along with custom homes, we build and finish commercial walls, ceilings and partitions, and we do acoustic removal.

Tell us about the walls on our contact page, in three short steps, or call (323) 440-0395.

From the blog

Drywall and plaster, explained.

See every post